Turn off the ignition and disconnect the wire «masses» from the battery.
Remove the spare wheel from the tailgate.
Open the tailgate and support it with stands or jacks with a clean cloth between them and the door.
Remove the upholstery and dust and moisture protective film from the door.
Label and disconnect from the door all electrical connectors, wire clamps and wire connecting to «weight».
Detach the protective corrugated cover from the door, and pull the wires out of the door through the opened hole.
Turn out bolts of fastening of the limiter of opening of a door.
Mark the position of the door hinges with a marker.
Pic. 14.42. The location of the bolts for fastening the hinges to the tailgate and the bolts for fastening the door opening limiter to the body
While the assistant supports the door, remove the bolts securing the hinges to the door and remove the door from the vehicle (pic. 14.42).
Install the tailgate in the reverse order of removal.
Fix the dust and moisture protection film by installing it without wrinkles or tears. The surface on which the dust and moisture protective film is glued must be perfectly clean.