Automatic transmission diagnostics Transmission malfunctions can be caused by the following reasons: poor-quality engine adjustment; poor-quality adjustment of the gearbox; malfunctions in the hydraulic system of the gearbox; malfunctions in the...
Replacement of sealing cuffs Transmission fluid leaks most often occur due to wear and aging of the seals of the drive shafts or the speedometer drive (speed sensor). Replacing these rings is not difficult as they can be replaced without removing...
Checking, adjusting and replacing the throttle control cable Note. These operations are performed only on models produced before 2001 Examination Remove the air filter housing and air intake duct. Pic. 9.11. Measuring the distance between the end of the cable sheath and the...
Replacing and adjusting the selector cable Warning! Cars are equipped with security systems (SRS), including airbags and seat belt tensioners. Before carrying out work near the shock sensors, the instrument panel and the steering column, first disconnect the...
Replacing and Adjusting the Starter Interlock Switch (PNP) Adjustment If the engine can be started in any position other than «P» and «N», adjust the starter interlock switch. Apply the parking brake and block the rear wheels. Raise the front of the car and place it on stands....