General information about the gearbox The gearbox converts the torque transmitted from the engine in magnitude and direction. This is necessary to ensure optimal speed and patency of the car, for the most economical operation of the engine, as well as for...
Gearbox repair — general information The gearbox is a complex unit, and therefore it is recommended to repair it at specialized car service enterprises. When removing and installing many parts, it is necessary to measure the gaps and adjust them using...
Replacing the transmission control cables Transmission control cables are not adjustable, so if damaged or stretched, replace them. Removing Pic. 9.1. Gearbox control cables on models up to 2001: 1 – gear lever handle; 2 - corrugated protective cover; 3 –...
Removal and installation of the gear lever Removing Remove the center console from inside the car. Release the cable clamps and disconnect both cables from the shift lever. Turn out bolts of fastening of the basis of the lever of a gear change and remove the...
Check and replacement of the switch of lanterns of a backing Examination Pic. 9.2. The location of the reversing light switch on top of the gearbox housing The reversing light switch is located on top of the gearbox housing (pic. 9.2). Turn the ignition on and engage reverse gear...
Transmission oil cooler replacement The gearbox oil cooler was installed only on all-wheel drive vehicles manufactured until 2001. Removing Remove the lower mudguards of the engine compartment. Remove the front bumper. Loosen the connecting nuts securing...
Removal and installation of a manual transmission with one drive axle Removing Turn off the ignition and disconnect the wire «masses» from the battery. Remove the air filter housing. Remove the expansion tank of the cooling system. With the vehicle on wheels, loosen the nuts securing the...