Removal and installation
1. On vehicles equipped with power windows, disconnect the battery from the ground.
2. Remove the door trim and screen.
Retainer
3. Remember the order of connecting the rods with the latch, highlighting with a powerful lamp.
4. Disconnect from the lock of draft.
5. Disconnect connector (on vehicles with electric lock).
6. Loosen the screws (indicated by arrows) and remove the retainer.
7. Installation is carried out in the reverse order.
Outside handle and lock switch
8. Remember the order of connecting the rods with the handle and the lock switch (indicated by arrows) (if there is an electric drive, there is no lock pull), disconnect the tie rods.
9. Remove the plug and unscrew the bolts (indicated by arrows) handle and switch, remove the handle.
10. Installation is carried out in the reverse order.
Internal handle
11.. The inner handle can be removed when removing the cladding (see subsection 10.12).
12. Installation is carried out in the reverse order.