Door lock
1. Raise the window, remove the inner door panel and the water shield.
2. Working through the openings in the door frame, disconnect the lock rods from the outer and inner handles (on vehicles with electric lock drive, disconnect the electromagnet rod).
3. All rods are secured with plastic latches. To disconnect a rod, disengage the latch from the rod and pull the rod out of the hole.
4. Loosen the mounting screws (indicated by arrows) and remove the lock.
5. Installation is carried out in reverse order.
External handle and lock switch
1. Raise the window, remove the inner door panel and the water shield.
2. Working through the openings in the door frame, disconnect the latches securing the lock rods. Access to the outside handle is provided through the opening in the door frame.
3. Loosen the mounting bolts and remove the lock switch mounting bracket (or unscrew the bolt).
4. Remove the handle assembly with the lock switch.
5. Installation is carried out in reverse order.
Inner handle
1. Remove the inner door panel and water shield.
The material was taken from a resource: www.ToyotaMan.ru
2. Unscrew the bolts (indicated by arrows), turn the handle and disconnect the drive rod of the lock from the inner handle.
3. Installation is carried out in reverse order.