Set of tools for medium and major repairs [Toyota Highlander XU20]

These tools are practically a must for any serious car repair and complete a toolbox for maintenance and minor repairs. Included in this list is a set of replacement sockets. Although expensive, they are absolutely necessary. We recommend purchasing a set of sockets with a 1/2" square socket (not 3/8"), as they can be used with most torque wrenches. Although they are more expensive, they can be used with almost any type of torque wrench (ideally, a good mechanic should have both types of drive elements at his disposal).

• Set of socket heads
• Reversible ratchet handle
• Extension 250mm long
• Torque wrench (with the same connecting element as the socket heads)
• Round-head hammer
• Soft-faced hammer (plastic or rubber)
• Screwdrivers:
• with flat end - 150 mm (length) x 6 mm (diameter)
• with flat end - strong, 8 mm
• with a cross-shaped end - No.3, 150 mm (length)
• with a cross-shaped end - strong, No.2
• Self-tightening wrench
• Pliers:
• with long noses;
• side cutters (for electrical work);
• spring ring pliers - external and internal

The original is this website: toyotaman.ru

• Chisel - 12.5 mm
• Marker
• Scraper (made from flattened copper tube)
• Kerner
• Punches (1.6 mm, 3.2 mm, 4.8 mm)
• Steel ruler/tape measure - 30 cm
• Set of internal hex keys (from 4 mm to 10 mm)
• Set of files
• Wire brush (large)
• Car stands (second set)
• Jack (rolling or hydraulic)

Note: Another tool that is always needed is an electric drill with a chuck of up to 95 mm and a set of good quality drill bits.