Introduction to repair manual Toyota Highlander 1 (XU20)

Getting to Know the Toyota Highlander and Lexus RX 300/330
This manual covers the Toyota Highlander and Lexus RX 300/330. Highlander models are available with either a four-cylinder or V6 engine, while Lexus RX 300/330 models are available with a V6 engine only. On front-wheel...

Vehicle identification
In the automotive industry, the process of modernization is continuous, it is not reflected in publications and occurs independently of the main changes of models. Since catalogs and lists of spare parts are compiled...

Information about recall campaigns
Recall campaigns are carried out by the manufacturer in rare cases when defects are detected on the vehicles that may affect traffic safety. In this case, the manufacturer contacts the registered owner of the car at its...

Purchase of spare parts
Replacement parts can be obtained in a number of ways, but generally all sources of supply fall into one of two categories. Either the parts department of an authorized dealer or an independent retail parts supplier....

Service technology
There are several methods for performing vehicle maintenance and repair procedures, which are referenced in the text of this Manual. Following the suggested instructions will make the work of a non-professional mechanic...

Fasteners
Fasteners include nuts, bolts, studs and screws used to connect two or more elements together. When working with fasteners, it is difficult to constantly remember some things. Almost any threaded connection uses one or...

Disassembling the elements
Disassembly of all elements must be carried out so carefully that during assembly each element can be installed in its original place and in the correct way. Be sure to mark the sequence in which the elements are...

Tools — General Information
Selecting good tools is the key to good maintenance and successful car repair. For car owners who do not have such tools, their purchase will entail significant expenses, which can only be partially avoided by making...

Tips for removing hoses
Caution: If the vehicle is equipped with an air conditioning system, do not disconnect any hoses from the system components under any circumstances until the system has been depressurized, which must be done at a...

Set of tools for maintenance and minor repairs
This list presents the minimum set of tools required for maintenance and minor repairs. We recommend purchasing combination wrenches (a box-end wrench on one side and an open-end wrench of the same size on the other);...

Set of tools for medium and major repairs
These tools are practically a must for any serious car repair and complete a toolbox for maintenance and minor repairs. Included in this list is a set of replacement sockets. Although expensive, they are absolutely...

Special tools and devices
The tools and equipment listed here are those that are used occasionally, are expensive, or are specialized. Many of these tools won't pay off if you rarely do complex mechanical work. If that's the case, you might want...

Purchasing, care and storage of tools
Buying tools A non-professional mechanic can be offered several practical tips in captivity of purchasing the tools necessary for performing car maintenance and repair procedures. When preparing to perform routine...

Technology for repairing damaged threads
Sometimes you may encounter stripping of the internal threads of a nut or bolt hole, usually when the tightening torque is exceeded. Stripping of threads occurs very often, especially when working with aluminum...

Workplace equipment
When talking about tools, we can't help but mention the equipment of the workplace. If you are going to do more serious work than just car maintenance, you should take care of preparing a suitable work area. It must be...

Lifting and installing the car on supports
The jack supplied with the vehicle should only be used to raise the vehicle to change a wheel or to place supports underneath it. Warning! Never climb under the vehicle or start the engine when the jack is the only...

Towing — General Information
Two-wheel drive models can be towed by positioning the vehicle front-first and raising the front wheels off the road (use a tow truck). When towing backwards, the front wheels must be mounted on a dolly. Four-wheel...

Starting from an external battery
When starting the engine from a booster battery, take the following precautions into account: a) Before connecting the auxiliary battery, turn off the ignition. b) Turn off all electrical equipment (lighting fixtures,...

Automotive chemicals, lubricants, sealants and operating fluids
Recently, many chemicals, oils, lubricants, sealants and operating fluids have been commercially available for use in routine maintenance and repair of automobiles. These include a wide range of chemical products, from...

Security — General Information
Regardless of your readiness to perform a particular job and our enthusiasm, first of all we should think about ensuring safety. Insufficient attention to this issue can lead to an accident. Failure to observe some of...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

Similar sections for other Toyota models

➥ Introduction to the guide Toyota Cruiser 100 (1998-2007)
➥ Introduction to the manual Toyota Carina T170 (1988-1992)
➥ Introduction to manual Toyota RAV 4 XA20 (2000-2005)

Link in different formats to this article

TEXTHTMLBB Code