Figure 1.12. Rear window heating switch: 1 – button
To clear fog or ice from the rear window, press the switch (figure 1.12).
The ignition key must be in the "ON" position.
A strip heating element on the inner surface of the rear window will quickly clean the surface. When the heater is turned on, the corresponding indicator lights up. To turn off the heater, press the switch again. Once the glass is clean, remember to turn off the heating. Leaving the heating on for a long time may drain the battery. The heater is not intended for drying rainwater or melting snow.
Caution! To avoid draining the battery, turn on the heater only when the engine is running.
Caution: When cleaning the inside surface of the rear window, be careful not to scratch the heating element strips.