Contents: Driver's seat adjustment ↓ Front passenger seat adjustment ↓ Longitudinal adjustment of the front…↓
Driver's seat adjustment
Install the driver's seat as follows:
- adjust the longitudinal position of the seat so that the pedals can be fully depressed with slightly bent knees;
- adjust the position of the seat back so that the back is completely against your back, and the top of the steering wheel can be reached with your arms slightly bent at the elbows.
Caution! Do not place any objects on the floor in front of the driver's seat, as they could end up under the pedals in the event of emergency braking or even a minor impact, making it difficult to control the vehicle.
Front passenger seat adjustment
Install the front passenger seat as follows:
- adjust the position of the seat back, which should be close to vertical;
- move the seat back as far as possible, with the passenger's feet comfortably resting on the floor.
Caution! For safety reasons, seat adjustments should only be made when the vehicle is stationary.
Longitudinal adjustment of the front seats
Figure 1.24. Location of front seat adjustment handles: 1 – longitudinal adjustment handle; 2 – seat cushion height adjustment handle; 3 – backrest angle adjustment handle
To adjust the front seats in the longitudinal direction, pull out handle 1 (figure 1.24) up and slide the seat. Then release the handle and move the seat a little further until the lock engages.
To adjust the seat backrest tilt, press handle 3 and set the desired backrest tilt position and release the handle.