Interior mirror adjustment
The mirror can be installed by turning the lever to one of two positions.
Adjust the rear view mirror using the drive lever.
In the basic position, the lever on the bottom of the mirror should point forward.
To eliminate the blinding effect of the headlights of a car coming behind, change the angle of the mirror by moving the lever back.
Outside mirror adjustment
Pic. 1.22. Reversing Switch Location (1) and installation (2) outside mirror switch
By moving the selector reversing switch to the position «L» adjust the position of the mirror on the driver's side, and in the position «R» - Passenger side mirror (pic. 1.22).
Power outside mirrors are set with the ignition on using the setting switch located on the instrument panel.
The mirror moves in the direction corresponding to the pressed arrow on the switch.
If the electrical adjustment fails, the position of the mirrors can be changed manually by pressing on the edges of the mirror.