2. Remove the turn signals.
3. Disconnect any lighting fixtures that may interfere with wing removal.
4. Remove the front grille if it has built-in light surrounds, or remove the lower headlight trim.
5. Remove the wheel arch protective panels by unscrewing the screws and detaching the latches and brackets.
6. Loosen the bolts securing the upper edge of the wing.
7. Open the door and unscrew the bolt securing the upper rear corner of the wing (indicated by the arrow).
8. Remove the lower trailing edge bolt located just behind the wheel well (indicated by the arrow).
9. Carefully remove the wing (it is recommended to act in pairs).
10. If the wing is going to be changed, remove the decorative trim from the wheel arch edge.
11. To do this, unscrew 5 bolts, take out 6 latches and drill out 2 rivets. Drill out the rivets with a drill, wrapping it 10 mm from the top.
12. Installation is carried out in reverse order.