Removal and installation
Attention! The work is done in pairs.
1. Open the hood and cover the fenders and air intake grille with a rag.
2. Disconnect the washer hoses.
3. Outline the hood hinges.
4. Place a rag under the corners of the hood, have an assistant hold the hood on one side, unscrew the hinge bolts and remove the hood.
5. Installation is carried out in the reverse order.
Adjustment
After installation, adjust the position of the latch so that the hood closes tightly and the surface of the hood is flush with the fenders.
1. Outline the hood latch bolts.
2. Loosen the bolts and move the latch to the desired position, then tighten the bolts.
3. By screwing in or out, adjust the hood buffers on the radiator strut so that the closed hood is flush with the fenders.
4. The latch and hinges of the hood should be periodically lubricated with lithol.