1. Raise the rear of the car.
2. Place pedestals under the bridge beam.
3. Pass the chain through the coils of the spring and secure with a bolt to prevent accidental loss of the spring when the axle is lowered. The length of the chain must ensure that the spring is fully extended.
4. Remove the stabilizer clamps.
5. Disconnect the cross bar from the bridge.
6. Carefully lower the bridge so that the springs can be reached. Keep an eye on the brake hose so as not to break it.
7. The springs are installed in the reverse order.
8. Track correctness of installation of springs in the bottom cup.