Checking the oil level in the rear axle gearbox [Toyota Carina T190]

1. Place the vehicle on a flat, horizontal surface.

2. Unscrew the filler plug. Make sure that the oil level in the crankcase is under the edge of the filler plug hole. If necessary, add oil to the crankcase.

Caution: Be careful, the oil in the crankcase may be hot immediately after driving.

Oil class according to API — GL-5

Recommended oil viscosity according to SAE:

Above -18°C - SAE

Below -18°C — SAE 80W or 80W-90

Filling capacity - 0.9

(The original source is located on the website: Toyotaman.ru)

3. After installing the filler plug, check the gearbox housing and axle for oil leaks or damage.

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

The article material has been checked: Kondratyeva Ulyana

Share information:

◀ Previous

Carina T190: Maintenance

Next ▶

Checking and replacing oil in manual transmission and transfer case (4WD)
Checking the electro-pneumatic valve of the exhaust gas recirculation…
Checking the diesel engine Exhaust Gas Recirculation (EGR) valve
Checking the operation of the electric pneumatic valve of the exhaust gas…
Electropneumokpapan (VSV) for adjusting the idle speed of a diesel engine

Checking the level and condition of the working fluid in the automatic…
Replacing the working fluid in the automatic transmission
Checking the oil level in the transfer case (A540N)
Transfer case oil change (A540N)

Similar articles on other Toyota models