Lower control arm of a car suspension "Toyota 4-Runner/ Hilux/ Surf"
1. Rear eccentric; 2. Buffer 2; 3. Lever; 4. Buffer 1; 5. Front eccentric
Removal and installation
1. Raise the front of the car and remove the wheels.
2. Remove the steering gear (see subsection 9.17).
The original article is on the portal [TOYOTAMAN.ru]
3. Disconnect the suspension strut from the lower arm.
4. Remove the stabilizer link and the bushing clamp next to the arm being removed.
5. Mark the position of the adjusting eccentrics.
6. Loosen the axle nuts and bolts.
7. Remove the lever.
8. Installation is carried out in reverse order.
9. When assembling, install the eccentrics according to the marks made during disassembly.
10. Tighten the lever axle bolts and nuts completely after lowering the vehicle.