Warning. Wear gloves when working inside doorways to avoid cutting yourself on sharp metal edges.
1. Remove the door trim panel and plastic waterproofing sheet (see paragraph 15).
2. Remove the glass (see paragraph 18).
3. Disunite an electric socket of the electric motor of a window regulator.
4. Loosen the temporary bolt, then remove the power window/motor mounting bolts (pic. 19.4).
Pic. 19.4. Loosen temporary bolt (A), and then unscrew the bolts of the window regulator (IN)
5. Remove window regulator in gathering with the electric motor. To remove the leveling arm/window regulator assembly, pull it out through the access hole in the door frame.
6. Installation is carried out in the reverse order of removal. Lubricate the rollers and contact points on the window regulator before installation «white grease».