Warning. Wear gloves when working inside doorways to avoid cutting yourself on sharp metal edges.
Door glass
1. Remove the door trim panel and plastic waterproofing sheet (see paragraph 15).
2. Lower the glass not all the way into the door.
3. Remove the door speaker (see chapter 12).
4. Raise the window just enough to access the power window mounting bolts through the holes in the door frame (pic. 18.4).
Pic. 18.4. Raise the glass to access the glass mounting bolts through the holes in the yard frame
5. Lay a rag over the glass to avoid scratching it, and remove the two glass mounting bolts.
6. Remove the glass by pulling it up and out.
7. Installation is performed in the reverse order of removal.
Tailgate glass
8. Replacing the tailgate glass requires the use of a special fast setting adhesive/sealant and certain special tools and techniques. Therefore, this procedure should be entrusted to the technical service department of the dealer or a specialized glass workshop.