Attention! In a car locked from the outside, no one should be left, especially young children, since the doors cannot be opened from the inside. This is especially important when operating vehicles with power windows, because in this case it is impossible to open the windows.
Attention! On some models, the front seat belts are equipped with pretensioners, which are pyrotechnic devices designed to tension the seat belts in the event of a collision.
Attention! On models equipped with tensioners, do not remove the tensioner blocks or disconnect the electrical connectors from them. If the seat belt tensioners fail, the SRS indicator in the instrument cluster comes on, and it is necessary to contact a service station to check and eliminate the defect.
Attention! On models with side airbags, deactivate the airbag system before starting work
Remove the front seats as follows:
Slide the seat all the way forward and remove the plastic covers to access the skids and the rear bolts of the front seat.
Pic. 14.60. The location of the rear bolts for fastening the front seat slide to the floor of the car
Turn out back bolts of fastening of a sled to a floor of the car (pic. 14.60).
Slide the seat all the way forward and unscrew the front bolts securing the slide to the floor of the car.
Raise the seat, disconnect all electrical connectors from the seat, and remove the seat from the vehicle.
Install the front seats in the reverse order of removal.