Front seat
1. To access the mounting bolts, move the seat forward until it stops, and then back.
2. Remove the pads (indicated by arrows) and unscrew the mounting bolts.
3. Tilt the seat and disconnect all connectors. Remove the seat.
4. Installation is carried out in the reverse order.
Backseat
1. To access the rear seat mounting bolts, remove the plugs. Turn away bolts, lift a forward part of a pillow and remove.
2. Turn away bolts (indicated by arrows) at the bottom of the back of the rear seat.
3. Raise the back of the rear seat and remove.
4. Installation is carried out in the reverse order.