When replacing wheel bolts, proceed as follows:
Loosen the wheel nuts.
Raise the vehicle and place it on stands. Remove the wheel.
Remove the brake disc or brake drum.
Pic. 13.21. Using a puller to force the wheel bolt out of the front wheel hub: 1 - hub flange; 2 - nut, partially screwed onto the bolt; 3 - puller
Partially screw the nut onto the wheel bolt to be replaced (pic. 13.21). Pull the bolt out of the hub with a puller, unscrew the nut and remove the bolt.
Insert a new bolt from the back into the hub hole, install several thick washers on the bolt and, screwing a nut on it, press it into the hub.
Install the brake disc or brake drum.
Install the wheel, tighten the nuts, lower the vehicle and tighten the wheel nuts