| Distance from pedal to body floor and free pedal travel(cm. subsection 2.28). | |
| Resistance of the differential locking drive (ADD) winding | 37 – 47 Ohm |
| Maximum distance from the friction lining surface to the disc rivet heads | 0.75 mm |
| Installation length of the axle shaft | 490 – 531 mm |
Tightening torque (Nm)
| Clutch | |
| Master cylinder mounting nuts | 10,8 |
| Clutch to flywheel mounting bolts | 17 |
| Working cylinder mounting bolts | 10,8 |
| Bleed nipple | 9,6 |
| Cardan shaft | |
| Cardan shaft flange bolts and nuts | |
| Front shaft (4WD cars) | 66 |
| Rear shaft (2WD/4WD vehicles) | 66 |
| Bolts for fastening the bracket of the middle support to the body | 32 |
Intermediate shaft nut | |
| stage 1 | 163 |
| stage 2 | Unscrew 1 turn |
| stage 3 | 74 |
| Front axle hub nut (4WD cars) | 75 |
| Rear axle | |
| Nuts for fastening the brake shield to the beam flange | 58 |
| Bolts of the electric locking differential drive (ADD) | 18 |
(See the source on the internet resource ToyotaMAN.ru)