Contents: Pedal height ↓ Free pedal travel ↓
Pedal height
1. Check the distance of the pedal pads from the floor. If this distance differs from the norm, then adjust it.
2. To adjust the clutch pedal, loosen the adjusting bolt or switch lock nut (A), loosen the rod lock nut (B). Rotate the rod to adjust the distance so that it corresponds to the middle of the range. Tighten the rod lock nut.
3. To check the brake pedal height, start the engine and press the pedal several times, then check the pedal height. To adjust, loosen the lock nut of the adjusting bolt or switch (A), loosen the lock nut of the rod (B). Turn the rod to adjust the distance so that it corresponds to the middle of the range. Tighten the lock nut of the rod.
4. Turn the switch or limiter bolt clockwise until it contacts the pedal pad. Tighten the lock nut.
Free pedal travel
1. Press the pedal with your finger and measure the distance until you feel a slight resistance to movement.
2. If it is necessary to adjust the free travel of the clutch pedal, loosen the rod lock nut and move the rod so that the free travel corresponds to the norm. Tighten the lock nut.
3. To adjust the free travel of the brake pedal with the engine stopped, press the pedal 10-12 times, then check the travel. Loosen the rod lock nut and move the rod so that the free travel corresponds to the norm. Tighten the lock nut.