Glued mirror
1. If a backlight is provided in the mirror, disconnect the ground wire from the battery.
2. Disconnect the existing wiring from the mirror.
3. Grasp the base of the mirror more securely and rotate it counterclockwise a half turn.
4. Remove the mirror from the glass.
5. Installation is carried out in the reverse order.
Screwed mirror
1. Gently pry up the pad (with appropriate equipment) flat spatula.
2. Remove the rubber damper from the mirror stem.
3. Remove the screw from the base and remove the mirror.
4. Installation is carried out in the reverse order.