Cylinder numbering order and direction of rotation of the engine distributor 1994-1997
Cylinder numbering order and direction of rotation of the engine distributor 1998
Designation | |
Engine 2.4L, 2RZ-FE | (power 143 hp) |
Engine 2.7 l, 3RZ-FE | (power 150 hp) |
Cylinder numbering order (from camshaft chain to transmission) | 1–2–3–4 |
The order of operation of the cylinders | 1–3–4–2 |
camshaft (all dimensions and clearances in mm) | |
Support journals diameter | 26,959 – 26,975 |
Gap in bearing journals: | |
– standard | 0,025 – 0,062 |
- marginal | 0,08 |
Neck ovality | 0,06 |
Cams size: | |
- inlet valves | 45,31 – 45,41 |
– exhaust valves | 45,06 – 5,16 |
Axial play: | |
– standard | 0,040 – 0,095 |
- marginal | 0,12 |
Camshaft gear engagement clearance: | |
– standard | 0,020 – 0,200 |
- marginal | 0,30 |
The distance between the ends of the pinion spring in the free state | 22,5 – 22,9 |
Oil pump | |
Gap between driven rotor and housing | 0,100 – 0,175 (limit 0.30) |
Gap between rotors | 0,011 – 0,240 (limit 0.25) |
Gap between rotor and cover | 0,030 – 0,090 (limit 0.150) |
Tightening torques (in Nm)
Bolts of an equalizing chamber of an air inlet | 18 |
Distributor drive gear | 41 |
Suction manifold bolts | 27 |
exhaust manifold nuts | 44 |
Exhaust pipe to exhaust manifold | 55 |
Fastening the heat insulator to the exhaust manifold | 4,8 |
Air tube mount (PAIR system): | |
- bolts | 17 |
- nuts | 18 |
crankshaft pulley bolt | 240 |
flywheel bolts | |
– 1st tightening step | 23 |
– 2nd tightening stage | tighten by 90° |
Torque converter drive plate bolts (automatic transmission) | 66 |
Tensioner pulley bolts | 33 |
Cylinder head bolts: | |
– 1st tightening step | 36 |
– 2nd tightening stage | tighten by 90° |
– 3rd stage tightening | tighten by 90° |
Bolts of fastening of a cover of a chain to a head of cylinders | 18 |
Bolts of fastening of covers of basic necks of a cam-shaft | 15 |
Camshaft driven sprocket bolt | 66 |
Oil pump bolts | 15 |
Nuts of fastening of an oil receiver | 16 |
oil nozzle | 16 |
Pallet bolts | 11 |
pressure reducing valve | 44 |
Bolts of the holder of a back epiploon | 18 |
Reinforcing plate bolts | 32 |
Chain cover nuts and bolts (see fig. Designation of different sizes of chain cover bolts): | |
- bolt A | 17 |
- bolt B | 23 |
- bolt C | 39 |
- nut D | 17 |
Chain cover bolts | 16 |
chain tensioner nuts | 18 |