General information
Engine displacement
Four-cylinder 2AZ-FE - 2.36 l
- V6 1MZ FE - 3.0L
- V6 3MZ-FE - 3.3 l
Compression pressure in the engine cylinders
- Four-cylinder engine - 14 kg / cm2
- V6 - 15 kg/cm2
Minimum compression pressure (all models) — 10 kg/cm2
difference between cylinders (all models) 1 kg/cm2
Oil pressure (all models)
- In idle mode - 0.3 kg / cm2 or more
- At 3000 rpm — 2.5...5.5 kg/cm2
Tightening torques for threaded connections, Nm (unless otherwise stated)
Models with four-cylinder engines
Balancing system shaft housing bolts
- Stage 1 - 22
- Stage 2 - Tighten 90°
Connecting rod bearing cap bolts
- Stage 1 - 25
- Stage 2 - Tighten 90°
Main bearing cap bolts (rice. 11.19, in)
- Stage 1 - 20
- Stage 2 - 40
- Stage 3 - Tighten 90°
Models V6
Connecting rod bearing cap bolts
- Stage 1 - 25
- Stage 2 - Tighten 90°
Main bearing cap bolts (rice. 11.19, b, c)
- Stage 1 (12-point bolts) — 22
- Stage 2 (12-point bolts) — Tighten by 90°
- Stage 3 (side bolts) — 27
Bolts of fastening of the case of an inlet of a cooling liquid — 8