Automatic transmission (type A340) of all-wheel drive vehicles
1. Transfer case lever handle; 2. Front section top panel; 3. Rear section top panel; 4. Front section box; 5. Transmission control mechanism assembly; 6. Transfer case control lever; 7. Retaining ring; 8. Plug; 9. Rear support; 10. Crossbar; 11. Front propeller shaft; 12. Rear propeller shaft; 13. Lower engine shields; 14. Rack; 15. Front exhaust pipe; 16. Gasket; 17. Reinforcement plate; 18. Torque converter; 19. Starter; 20. Transmission fluid cooling tubes; 21. Ring; 22. Filling pipe; 23. Middle section of the front panel; 24. Probe; 25. Heater control panel
The cars are equipped with 4-speed transmissions (3 gears forward and 1 reverse) type A43D or A340F(or A340E, depending on the wheel arrangement).
All vehicles are equipped with a lock-up torque converter (LTC), which provides direct coupling between the engine and the wheels.
The transmissions of the A43D or A340F types are controlled by an on-board processor unit, which switches electromagnetic valves on and off.
(The article was copied from the portal: «toyotaman.ru»)
Transmission repair with complete disassembly is performed only in a car service center.
You can remove and install the transmission yourself, as well as perform certain types of maintenance, adjustment and diagnostic work.