2. Remove the left wing inner splash guard (see chapter 11).
3. Remove the front bumper (see chapter 11).
4. Remove the cooling air line from the transmission fluid heat exchanger (Fig. 7.4).
Fig. 7.4. Remove the cooling air line from the transmission fluid heat exchanger
5. Disconnect the lines from the heat exchanger.
[The material is reprinted from an online resource toyotaman.ru]
6. Unscrew the bolts (Fig. 7.6) and remove the heat exchanger, extracting it from the front wing area.
Fig. 7.6. Location of transmission fluid heat exchanger mounting bolts
7. Installation is performed in the reverse order of removal.