Turn off the ignition and disconnect the wire «masses» from the battery.
Pic. 15.31. Removing the plug covering the windshield wiper arm mounting nut
Mark the position of the wiper blades on the windshield, then remove the plug, remove the nuts and remove the wiper arms (pic. 15.31).
On the rear window wiper, tilt the cap off the base of the arm, remove the nut and remove the wiper arm.
Disconnect the windshield washer hose from the wiper arm.
Further removal of the front wiper motor as follows:
- release the clips and remove the ventilation chamber deflector located at the base of the windshield;
Pic. 15.32. An arrangement of nuts of fastening of the mechanism of a cleaner of a windscreen
- Disconnect the electrical connector from the wiper motor and remove the nuts securing the windshield wiper mechanism (pic. 15.32);
- remove the windshield wiper mechanism from the ventilation chamber;
Pic. 15.33. Location of windshield wiper motor mounting bolts
- unscrew the bolts and remove the engine from the windshield wiper mechanism (pic. 15.33);
Further removal of the rear wiper motor, proceed as follows:
- remove the upholstery of the tailgate;
Pic. 15.34. Arrangement of bolts of fastening of the engine of a cleaner of back glass
- disconnect the electrical connector, remove the bolts and remove the rear window wiper motor (pic. 15.34).
Install wiper motors in the reverse order of removal.