Note. Recommended frequency: every 400 km or weekly.
Checking the condition of your tires is an important preventive measure that can provide information about the condition of your vehicle's steering and suspension and prevent serious damage.
Tread depth is measured with a simple measuring tool called a depth gauge. When the tread depth reaches the minimum required by law or the tire manufacturer, change the tires.
When inspecting tires, note any abnormal tread wear. Signs of uneven tread wear, such as stepped tread wear, patchy tread wear, and increased wear on one side of the wheel, are indicative of misalignment and/or balance. If any of these signs of uneven wear are found, find the cause and repair immediately. Too high tire pressure causes accelerated wear of the middle part of the tread, which reduces traction, reduces the damping effect of the tire and increases the risk of tire blowout. Regularly check the tires for cuts or bulges, especially on the side surfaces. Remove stones or sharp objects stuck in the tread. Periodically remove the wheels and clean the outer and inner surfaces of the wheel from dirt. Signs of wheel imbalance are usually vibration of the car body (at a speed of about 90 km/h), although in most cases the vibration is felt through the steering wheel. Be aware that worn or damaged steering and suspension parts can cause excessive tire wear. Uneven front tire wear indicates misalignment of the wheels.
Check your tire pressure regularly and keep the pressure at a normal level. Check cold tire pressure before or after a ride.
If the tire pressure drops, first check the tires for punctures or cuts. If the tire has no defects, check the condition and tightness of the spool. To make it easier to find air leaks, apply soapy water to the suspected leak. If there is a leak, the soap solution will begin to bubble.
Carefully inspect the inner sidewall of each tire for traces of brake fluid. If traces of brake fluid are visible, check the condition of the wheel brakes immediately.