Warning! Cars are equipped with security systems (SRS), including airbags and seat belt tensioners. Before carrying out work near the shock sensors, the instrument panel and the steering column, first disconnect the negative and then the positive terminals from the battery and wait 2 minutes. This will prevent the airbags from deploying unintentionally and the seat belt pretensioners from deploying, which could cause injury.
Turn off the ignition and disconnect the wire «masses» from the battery.
The heater fan is located in the passenger compartment above the right foot of the front passenger.
On cars of release till 2001 remove a ware box.
Pic. 4.21. Fan motor: A - electrical connector; B - fan motor
Disconnect the electrical connector from the fan motor (pic. 4.21).
Turn out screws of fastening and take out down the fan from a casing.
If the fan motor is to be replaced, remove the circlip, remove and reposition the fan on the new motor, secure it with the circlip.
Further installation is carried out in the reverse order of removal.
Check the operation of the fan motor.