A) Disconnect the motor connector.
b) Connect battery to terminal 2 (+) electric motor and (-) to the hull.
V) The motor must rotate slowly.
2. High speed operation test.
A) Disconnect the motor connector.
b) Connect battery to terminal 1 (+) electric motor and (-) to the hull.
V) The motor must rotate quickly.
3. Check stop at the start position.
A) Set the motor to low speed operation.
b) Disconnect power from terminal 2 in any position other than the initial position.
V) Connect terminals 2 and 3.
G) Connect battery to pin 4 (+) electric motor.
d) The electric motor should start to work and stop in the initial position.
If the test fails, replace the motor.