Removing
Disconnect ground cable (-) from the battery.
Attention: As a result, the on-board computer records are erased, in particular, the fault records and the radio code. Before disconnecting the battery, you must familiarize yourself with the contents of the section "Removing and installing the battery".
Disconnect the plug connection of the fan cable.
Loosen the screws of the fan holder.
Tilt the fan motor with holder back and pull it out.
While holding the fan rotor, unscrew the central motor bolt.
Unscrew the mounting bolts and remove the electric motor from the holder.
Installation
Fix the motor with bolts on the holder, and the impeller on the electric motor.
Fix the electric motor with the holder on the radiator.
Connect cable.
Connect ground cable to (-) battery.
Set the time on the clock, if any, and enter the security code into the radio.
Check the operation of the electric fan. To do this, start the car engine, warm it up and check that the fan is turned on.