Attention! In case of serious damage, the caliper is recommended to be replaced.
Removing
1. Loosen wheel nuts, raise vehicle and place on stands. Remove wheels.
2. Remove about 2/3 of the fluid from the reservoir (to avoid transfusion when diluting pads). Clean the caliper and adjacent parts.
3. If the caliper will change, then unscrew the hydraulic fitting nut (fitting bolts are indicated by arrows).
4. Turn away bolts and remove a support. If a shoulder has formed in the disc due to wear, then first remove the pads.
5. Replace the caliper if a leak is found.
Installation
6. Assembly is carried out in the reverse order. Bolts of a support tighten with the set moment. Bleed the air from the hydraulic (if understood).