2. (For models with disc brakes) Remove the caliper assembly and brake disc.
- A) Loosen the two caliper mounting bolts.
- b) Hang the caliper on the wire.
- V) Remove the brake disc.
3. (For models with drum brakes) Remove the brake drum.
4. Check bearing end play and hub runout.
- A) Using a dial indicator, check the axial clearance of the bearing. The maximum clearance is 0.05 mm. If the clearance is not correct, replace the bearing.
- b) Using a dial gauge, check the hub runout. Maximum runout 0.07 mm. If the runout is out of specification, replace the hub and bearing.
5. Remove the rear wheel hub.
- A) Remove the four bolts and remove the rear wheel hub.
- b) Remove the O-ring.