Description of diesel engines 2C, 2C-T Engines 2C and 2C-T in-line 4-cylinder, 8-valve with an overhead camshaft Engine displacement 2.0 liters. Cylinder numbering is from the crankshaft pulley. Engine running order: 1-3-4-2. Crankshaft 5-support with 8...
Checking and adjusting thermal clearances in valves Note: checking and adjusting the thermal clearances in the valves is carried out on a cold engine. 1. (2C) Remove the vacuum tube. A) Disconnect the following hoses from the vacuum tube: (1) - hose from the vacuum tube...
Timing belt — removal Parts for removal and installation. 1 - a bolt of fastening of a pulley of a cranked shaft (М3=196 Nm), 2 - crankshaft pulley, 3 - timing belt cover No. 1, 4 - timing belt cover and alternator bracket, 5 - timing belt...
Timing Belt — Installation Parts for removal and installation. 1 - a bolt of fastening of a pulley of a cranked shaft (М3=196 Nm), 2 - crankshaft pulley, 3 - timing belt cover No. 1, 4 - timing belt cover and alternator bracket, 5 - timing belt...
Cylinder head — removal Details for removal and installation of a head of the block of cylinders (2S-T). 1 - timing belt; 2 - tension spring; 3 - cover No. 3 of the timing belt; 4 - gasket; 5 - cover No. 2 of the timing belt; 6 - clamp; 7 - a...
Cylinder head — installation Details for removal and installation of a head of the block of cylinders (2S-T). 1 - timing belt; 2 - tension spring; 3 - cover No. 3 of the timing belt; 4 - gasket; 5 - cover No. 2 of the timing belt; 6 - clamp; 7 - a...
Cylinder block — disassembly and assembly Parts for disassembly and assembly of the cylinder block. 1 - oil dipstick guide and oil dipstick assembly; 2 - gasket; 3 - oil level sensor; 4 - drain plug; 5 - oil pan No. 1; 6 - front crankshaft oil seal; 7 -...