Display meanings:
LOAD | The store is full |
FULL | 35 entries stored in memory (maximum amount) |
- -- | Waiting for input |
R-01 | Shows how many songs |
3 -- -- -- | Disc selection in progress |
Error messages:
Err1 | The disc is dirty or inserted upside down. The inscription flashes and the player switches to another disc |
Err2 | There are scratches on the disc. The label flashes and the player switches to another disc |
Err3 | Player operation is not possible. Click the button "EJECT" to eject discs |
There are no discs in the store, the display is blank |
Listening to discs
The ignition switch must be in position "ON" or "ACC". Press button 11 "CD CH".
Note: Adjust the volume and timbre of the sound on the radio panel.
To stop a disk:
- If the player is connected to a radio receiver, then press the button 11 "CD CH". If you have been listening to the radio before, it will turn on again.
- If the player is connected to the radio, playback is stopped by the radio off button (combined with volume control).
Disc selection
1 Button 12 "DISK". Click on the left side to select the disc with a lower number, on the right side to select the disc with a higher number.
2. Buttons 1...6. First, press the button with the number of the desired disc, then no later than 5 seconds later, press the button 12 "DISK" (any side).
Record selection
1. Button 13 "TRACK". Click on the left side to select the entry with a lower number, on the right side to select the entry with a higher number.
2. Buttons 1...9.0. First, press the button with the number of the desired entry, then within 5 seconds, press the button 13 "TRACK" (any side).
Rewind
To rewind, press and hold button 13 "TRACK" (left side back, right side forward). Rewind will stop when the button is released.
Repeat Recording
To loop through the current track, press the 17 "RPT". The display will show "RPT". To turn off repeat, press the button again.
Disc Repeat
To play the current disc repeatedly, press 17 "RPT" to the beep. The display will show "DISK RPT".
To turn off the repeat, press the button until the beep sounds again.
Quick Disc View
By pressing button 18 "SCAN" plays 10 seconds of each track on the current disc in order. The display will show "SCAN"
By pressing the button again "SCAN" playback of the current song will continue.
Quick disc browsing
This function plays 10 seconds of the first recording of each disc. Press and hold button 18 until the beep "SCAN" The display will show "DISK SCAN". When the desired disc is found, press the button again "SCAN".
Random selection of records
To play the tracks on the current disc in random order, press the 19 "RAND". The display will show "RAND"
To continue playing the recording, press the button again "RAND".
To randomly play recordings on all discs, press the 19 "RAND" to the beep. The display will show "RAND DISK". To continue playing the recording, press the button again "RAND" to the beep.
Pause
Click on button 14 "PAUSE" to temporarily stop playback. Pressing again continues playback from where it stopped.
Playback Programming
1. Program creation:
- A) Press button 14 "PAUSE".
- b) Press button 15 "P-PLAY".
- V) Buttons 1...10, 12 "DISK", 13 "TRACK" select the desired disc and record
- G) Fix the setting with button 15 "P-PLAY". The display will show "MEMO".
Repeating points "V" And "G", up to 35 entries can be programmed.
2. Program playback:
- A) If the program has just been created, just press the button 14 "PAUSE".
- b) To call the program later, press the button 15 "P-PLAY".
3. View the contents of the program.
- Click on button 16 "RECALL".
4. Deleting the program.
- Press and hold button 15 "P-PLAY", until the inscription goes out "MEMO".
Player care
Wipe the player with a dry soft cloth, in case of severe dirt, moisten the cloth with alcohol. When using chemical cleaners, make sure they are designed for plastic.
Do not use gasoline or solvents for cleaning as plastic parts and paint may be damaged.