Volume control
The volume is adjusted when the slider is in the extended position (for this you need to click on it).
Balance adjustment
The balance of the right and left channels is adjusted by knob 7 (BAL) in the depressed position. The balance between the front and rear speakers is adjusted by knob 5 (FADE).
Equalizer
Adjustment of the sound frequency is made by the adjustment knobs in the extended position. 5 "TREB" - high frequencies, 6 "MID" - mids and 7 "BASS" - low frequencies. You can also choose from five preset settings.
Factory settings
Mode | Setting |
EQ1 | equalizer disabled |
EQ2 | bass and treble boost |
EQ3 | bass boost |
EQ4 | high frequency boost |
EQ5 | midrange boost |
Change settings
1. Use the equalizer button to select the desired program.
2. Use the control knobs to adjust the tone of the sound.
3. Press and hold the equalizer button until you hear a beep.
Return to factory settings
1 Use the equalizer button to select the desired program whose setting you want to restore.
2. Press and hold the equalizer button until the second beep (the first beep will sound after approximately 2 seconds, the second after 8 seconds).
If you want to restore the factory settings of all five programs, press and hold the equalizer button again until you hear a beep (about 10 seconds).
Adjusting the character of the sound
1. Press button 9 "DSP".
2. By pressing button 10 "MODE" sound programs change.
Factory settings
Mode | Setting |
HALL | concert hall |
LIVE | small room |
CATHEDRAL | Cathedral |
DOME | stadium |
Change settings
1. Select the desired program.
2. Button 11 "LEVEL" get the sound you want. The setting is automatically memorized.
Return to factory settings
1. Button "MODE" select the desired program whose settings you want to restore.
2. Press and hold the button "MODE" to the beep. If you want to restore the settings of all programs, press and hold the button again "MODE" before the beep (about 8 seconds).
Radio
The radio is turned on by pressing a button "AM/FM". Pressing this button again switches the range (AM) or (FM).
Tuning radio stations
Press button 13 (up or down arrows) before the beep (automatic search for a radio station). The search will stop when a stable signal is found. If the signal is weak, if the automatic search does not fix the setting, press the setting button again (auto search will be disabled) and adjust manually one step at a time.
Programming settings
The settings of the most frequently listened to radio stations can be memorized To do this, tune in to the desired radio station, then press and hold one of the buttons (14 - 19) to the beep. Switching to the tuned radio station is carried out by briefly pressing the desired button.
Note: if the batteries are not used for a long time, the memory of the radio is erased and the factory settings are restored.
"Favorite Station"
You can set the most frequently listened to radio station to a separate button 12. When you press it, this station immediately turns on, regardless of which device worked before.
Note: new radios are set to 1620 kHz.
Setting
Use the tuning buttons to tune in to the desired radio station, then press and hold button 12 until you hear a beep.
Note: When receiving a radio station with traffic information, the tuning and radio station selection buttons do not function. First, turn off the reception by pressing the button 12 again.
Record player
The tape recorder is turned on with button 4 "TARE" Playback and stop of the cassette are carried out by pressing the button 1 "PWR".
Noise reduction system
When listening to cassettes recorded with DOLBY B (WITH) NR, turn this system on by pressing button 15 "DOLBY". Pressing again switches between DOLBY B and DOLBY C. To turn off the noise reduction system, press the button again.
Reverse
Changing the playback direction of the cassette is done by pressing the button 19.
Rewind
Press button 13 to rewind (rewind - "REW", forward - "FF" To stop rewind, press the rewind button 13 again or the button 4 "TARE").
Quick listening to the contents of a cassette
By pressing button 14 "SKAN" 12 seconds of each track is played in order. By pressing the button again "SKAN" the melody will continue playing.
Melody search
This function is for jumping to any of the 9 tracks before or after the current playback location.
To do this, press the button 18 as many times as you need to go to the records (when navigating back, take into account the current record). Then press the rewind button 13 (to go back - to REW, forward - FF. To stop rewinding, press the rewind button again, or press the 4 "TARE".
Note: If there is a pause of less than 3 seconds between recordings or there are extraneous sounds, this function may not work properly.
Repeat Recording
To loop through the current track, press the 17 "RPT". To turn off repeat, press the button again.
Note: If there is a pause of less than 3 seconds between recordings or there are extraneous sounds, this function may not work properly.
Skip empty seats
This function is for rewinding blank spaces on a tape. To turn on, press button 16 "SKIP". To disable the function, press the button again.
Note: This function may not work properly if: the pause between recordings is less than 15 seconds; between recordings there are extraneous sounds; the beginning and end of the entry cannot be clearly defined.
CD player
Switching to CD player mode is done by button 2 "CD"
Insert the disc label-side up, being careful. Playback and stop are carried out by pressing the button 1 "PWR".
To eject the disc, press button 21 "EJECT".
Rewind
To rewind, press the button 18 (back) or 19 (forward). Rewind will stop when the button is released.
Quick Disc View
By pressing button 16 "SKAN" 12 seconds of each track is played in order. By pressing the button again "SKAN" playback of the current song will continue.
Record selection
To select an entry, press button 13 until the number of the desired entry appears on the display.
Repeat Recording
To loop through the current track, press the 17"RPT". To turn off repeat, press the button again.
Random selection of records
This function allows you to play CD tracks in random order. The function is switched on and off with button 15 "RANDOM".
Volume limit
The function limits the maximum volume of the system. Press button 14 to switch on and off "COM"
Note: Due to overheating or other malfunctions, disc playback will automatically stop. In this case, take the following measures:
- If the disc indicator is off, press button 2 again "CD"
- If the indicator is lit in red, the temperature inside the player is too high. Remove the CD and wait until the indicator goes out, then reinsert the disc.