Share information:
Vehicle SRS Security System Toyota Duet
Precautions during operation and repair work
Errors made during maintenance of the security system may result in the system being inadvertently activated during maintenance or in the system not being activated during an accident, so always follow the rules...
Errors made during maintenance of the security system may result in the system being inadvertently activated during maintenance or in the system not being activated during an accident, so always follow the rules...
Security system connectors
All SRS wiring connectors are painted yellow, connector contacts are gold-plated. The connector design ensures safe operation of the system and provides for diagnostics of a complete connector short circuit. Double...
All SRS wiring connectors are painted yellow, connector contacts are gold-plated. The connector design ensures safe operation of the system and provides for diagnostics of a complete connector short circuit. Double...
System diagnostics
1. Checking the SRS indicator. Turn the ignition switch to the "ON" position, check that the indicator comes on and goes out after about 6 seconds. 2. If the indicator lights up later than 6 seconds, check the system...
1. Checking the SRS indicator. Turn the ignition switch to the "ON" position, check that the indicator comes on and goes out after about 6 seconds. 2. If the indicator lights up later than 6 seconds, check the system...
Front passenger airbag module
Note: Install in the reverse order of removal. When removing, refer to the assembly drawing.
Note: Install in the reverse order of removal. When removing, refer to the assembly drawing.
Driver airbag module
Installation 1. Set the vehicle wheels to the straight-ahead position. 2. Install the spiral wire. a) Install the coil wire onto the combination switch by aligning the slots as shown in the figure. b) Connect the...
Installation 1. Set the vehicle wheels to the straight-ahead position. 2. Install the spiral wire. a) Install the coil wire onto the combination switch by aligning the slots as shown in the figure. b) Connect the...
This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Link in different formats to this article
TEXTHTMLBB Code
- General information
- User manual
- Maintenance
- Power unit
- Petrol engines 1.0 l
- Petrol engines 1.3 l
- Engine overhaul
- Cooling system
- Lubrication system
- Fuel injection system
- Starting and charging system
- Transmission
- Clutch
- Mechanical gearbox
- Automatic gearbox
- Drive shafts and cardan
- Chassis, running gear
- Car suspension
- Steering
- Brake system
- Body and interior
- Body elements
- Heating and air conditioning
- SRS security system
- Electrical equipment
- Equipment and devices
- Electrical circuits
- Petrol engines «Y»
- Checks and adjustments
- Overhaul engine
- Cooling and lubrication system
- Fuel system
- Starting and charging system
- Ignition system
- Diesel engines «L»
- Engine repair
- Cooling and lubrication system
- Fuel system
- Starting and charging system
- Transmission
- Clutch
- Manual gearbox
- Cardan shaft
- Chassis, running gear
- Car suspension
- Brake system
- Steering
- Electrical equipment and body
- Body elements
- Equipment and devices
- Electrical diagrams