Share information:
Cardan shaft of the car Toyota Dyna (100/150)
.
Troubleshooting issues
Precautionary measures Be careful when clamping the driveshaft in a bench vice to avoid damaging it.
Precautionary measures Be careful when clamping the driveshaft in a bench vice to avoid damaging it.
Removal the propeller shaft
1. Disconnect the propeller shaft flange from the differential mating flange. a) Apply marks to the flanges for subsequent alignment. b) Unscrew the four bolts and nuts Cardan shaft: 1 - Crosspiece bearing, 2 -...
1. Disconnect the propeller shaft flange from the differential mating flange. a) Apply marks to the flanges for subsequent alignment. b) Unscrew the four bolts and nuts Cardan shaft: 1 - Crosspiece bearing, 2 -...
Checking the technical condition of the cardan shaft components
1. Check the cardan and intermediate shafts for damage or wobble. If the shaft runout exceeds the established norm, replace the corresponding shaft. Maximum runout - 0.8 mm 2. Check the technical condition of the...
1. Check the cardan and intermediate shafts for damage or wobble. If the shaft runout exceeds the established norm, replace the corresponding shaft. Maximum runout - 0.8 mm 2. Check the technical condition of the...
Replacing the crosspiece bearing
1. (Dyna 150) Disconnect the yoke from the driveshaft. a) Apply marks to the fork and cardan shaft. b) Disconnect the fork from the shaft. 2. Mark the fork and flange. 3. Remove the retaining rings. a) Lightly tap the...
1. (Dyna 150) Disconnect the yoke from the driveshaft. a) Apply marks to the fork and cardan shaft. b) Disconnect the fork from the shaft. 2. Mark the fork and flange. 3. Remove the retaining rings. a) Lightly tap the...
Installing the cardan shaft
1.1 (Dyna 100) Connect the propeller shaft to the gearbox. a) Remove the plug. b) Insert the fork into the gearbox. 1.2 (Dyna 150) Connect the driveshaft to the parking brake drum. a) Align the marks on the flange and...
1.1 (Dyna 100) Connect the propeller shaft to the gearbox. a) Remove the plug. b) Insert the fork into the gearbox. 1.2 (Dyna 150) Connect the driveshaft to the parking brake drum. a) Align the marks on the flange and...
This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Link in different formats to this article
TEXTHTMLBB Code
- General information
- User manual
- Maintenance
- Power unit
- Petrol engines 1.0 l
- Petrol engines 1.3 l
- Engine overhaul
- Cooling system
- Lubrication system
- Fuel injection system
- Starting and charging system
- Transmission
- Clutch
- Mechanical gearbox
- Automatic gearbox
- Drive shafts and cardan
- Chassis, running gear
- Car suspension
- Steering
- Brake system
- Body and interior
- Body elements
- Heating and air conditioning
- SRS security system
- Electrical equipment
- Equipment and devices
- Electrical circuits
- Petrol engines «Y»
- Checks and adjustments
- Overhaul engine
- Cooling and lubrication system
- Fuel system
- Starting and charging system
- Ignition system
- Diesel engines «L»
- Engine repair
- Cooling and lubrication system
- Fuel system
- Starting and charging system
- Transmission
- Clutch
- Manual gearbox
- Cardan shaft
- Chassis, running gear
- Car suspension
- Brake system
- Steering
- Electrical equipment and body
- Body elements
- Equipment and devices
- Electrical diagrams