Oil cooler parts
1. Ring; 2, 4. Gasket; 3. Oil cooler; 5. Bypass valve; 6. Hose 1; 7. Hose 2
Removing
1. Disconnect the battery from the ground.
2. After the engine has completely cooled down, drain the fluid.
3. Remove the air filter.
4. Disconnect the front exhaust pipe.
5. Disconnect the air tube of the impulse PAIR system (if provided).
6. Remove the exhaust manifold.
7. Remove the oil pressure sensor.
8. Disconnect the hoses.
9. Loosen the bolt.
Installation
1. Installation is carried out in the reverse order.
2. Replace oil cooler gaskets.
3. When installing, align the recess in the oil cooler with the protrusion on the cylinder block.