Radiator and related parts
1, 4. Hose; 2, 15, 22. Rack; 3, 21. Cork; 5. Battery clamp; 6. Battery; 7. Tray; 8. Casing 1; 9. Casing 2; 10. Tank; 11. Lattice; 12. Side lamp; 13. Pump pulley; 14. Impeller and clutch; 16, 19. Drain plug; 17, 20. Ring; 18. Radiator
Removal and installation
1. Disconnect the battery from the ground.
2. After the engine has completely cooled down, drain the fluid.
3. Disconnect hoses and air tube from radiator.
4. Remove the fan and shroud.
5. On car parts, remove the battery and tray.
6. Remove the front grille.
7. Loosen the radiator bolts (arrows).
8. Remove radiator, check and clean.
9. Installation is carried out in the reverse order. After the engine warms up, check the fluid level.
10. On vehicles with automatic transmission, check and top up the transmission fluid level.
11. Lift the tank up and remove. Rinse and change water. If cracks are found, replace the tank.