Contents: Removal ↓ Installation ↓
Removal
Note: When removing, refer to the figure "Removing and installing the working fluid cooler hoses".
Installation
1. Clean the hoses before installation.
2. Connect the coolant cooler outlet hose.
Note: One end of the hose is connected to the radiator and the other to the gearbox, as shown in the figure.
 |  |
3. Install the clamps on the hose.
5. Install the coolant cooler inlet hose.
Note: One end of the hose is connected to the radiator and the other to the gearbox, as shown in the figure.
 |  |
6. Install the clamps on the hose.