- a) Remove the rear seat cushion.
- b) Remove the side panels of the rear seat back.
- c) Remove the rear pillar trim.
- d) Remove the trim bracket.
- d) Remove the front trunk trim.
- e) Loosen the bolts securing the hinges to the body and adjust the trunk lid. Tightening torque 5.4 Nm.
- g) Install the front trunk trim.
- c) Install the trunk trim bracket.
- i) Install the rear pillar trim.
- k) Install the rear seat back side panels. Tightening torque 19 Nm.
- l) Install the rear seat cushion.
2. Adjusting the lock bracket.
- a) Remove the holders and the rear trim of the trunk.
- b) Slightly loosen the lock bracket mounting screws, lightly tap with a plastic hammer, adjust the position of the bracket.
- c) Install the rear trunk trim.