Removing the torsion bar
1. Remove the following parts:
- V) Trunk floor mat.
- b) Rear trunk lining.
- V) Side lining of the trunk.
2. Remove the torsion bar.
- A) Remove the torsion bar from the center bracket.
- b) Install the special tool on the torsion bar on the hinge side of the trunk lid.
- V) Using the special tool, push down on the torsion bar and disconnect the hinge element from the torsion bar.
- G) Remove the torsion bar from the mounting hook.
- d) Disconnect the torsion bar from the bracket
- e) Do the same operations on the other side.
Torsion bar installation
1. Install the torsion bar.
- A) Insert the torsion bar into the bracket as shown.
- b) Install the torsion bar on the mounting hook.
- V) Using the special tool, slowly lift the torsion bar and install it on the hinge element.
- G) Install the torsion bar in the center bracket
- d) Do the same operations on the other side.
2. Install the following parts:
- A) Side lining of the trunk.
- b) Rear trunk lining.
- V) Trunk floor mat.