- A) Check up conductivity between conclusions of a socket of the switch according to the table.
Switch position | conclusions |
"0" | 1-6 |
"1" | 2-6 |
"2" | 3-6 |
"3" | 4-6 |
Backlight | 7-9 |
- b) If the conductivity is not as described, replace the switch.
2. Check the operation of the drive.
- A) Connect the battery to terminals 5 (-) and 6 (+) drive connector.
- b) Ground each terminal in turn and check that the operation of the drive in each mode is as described in the table.
conclusions | headlight position |
1 - "Earth" | "0" |
2 - "Earth" | "1" |
3 - "Earth" | "2" |
4 - "Earth" | "3" |
- b) If the operation of the actuator is not as described, replace the actuator.