2. Loosen the bolts and remove the rear belt cover.
3. Determine the depth of pressing the oil seal, then carefully remove the oil seal from the oil pump housing by prying it up with a screwdriver.
4. Clean the seal bore and lightly lubricate the outer surface of the seal with engine oil. Lubricate the working edges of the seal with multi-purpose grease.
5. Carefully, without distorting it, press the new oil seal into place using a mandrel with a diameter slightly smaller than the diameter of the oil seal.
View the original source on the website [ToyotaMAN]
6. Install the remaining parts, start the engine and check for leaks.