- A) (Models up to 96 onwards with 3S-GE engine) Install the slave cylinder with the tube bracket and tighten the two bolts. Tightening torque 72 Nm.
- b) (Other models) Install the slave cylinder and tighten the two bolts. Tightening torque 12 Nm.
- V) (Models from 96 onwards) Connect the tube clamp to the bracket and tighten the bolt. Tightening torque 4.9 Nm.
2. Using the special tool, connect the hydraulic lines. Tightening torque 15 Nm.
3. (3S-GE engine) Connect the tube clamp to the bracket with a bolt and install the protective cover.
Install the protective cover and tighten the two bolts. Tightening torque 12 Nm.
4. Fill the expansion tank with brake fluid and bleed the system.
5. Check for leaks.