2. Drain the fuel from the fuel filter.
a) Attach the vinyl hose to the drain valve, insert the other end of the vinyl hose into the container.
b) Unscrew the drain plug and drain the fuel.
3. Replace the fuel filter.
A. Remove the fuel filter.
B. Use pliers to unscrew the water presence sensor.
Attention: do not damage the sensor!
B. Transfer the sensor to the new fuel filter:
a) Lubricate the sealing ring with fuel.
b) Tighten the sensor by hand.
D. Install the fuel filter.
a) Check and clean the fuel filter mating surface.
b) Lubricate the filter gasket with fuel.
c) Screw the fuel filter until it touches the bracket and tighten it with a wrench by three quarters of a turn.
4. Bleed the fuel filter. Pump fuel with a hand pump until you feel resistance.
5. Connect the water presence sensor connector.
6. Start the engine and check for fuel leaks.