Exhaust gas exhaust system The exhaust system consists of a front pipe, an intermediate pipe with a catalyst and a main silencer. Gasoline engines with aftertreatment systems additionally have a catalytic converter (catalyst), installed, as a...
Catalyst operation TOYOTA COROLLA cars are equipped with both adjustable and non-adjustable catalytic converters. A controlled catalyst requires a controlled blender. A controlled air-fueler is a carburetor or injection system in which...
Rules for handling vehicles equipped with a catalyst To prevent damage to the oxygen sensor (lambda probe) and catalyst, the following rules must be observed: Use only unleaded gasoline. If by mistake the fuel tank was filled with leaded gasoline, it is necessary to...
Elements of the exhaust system Note: The mounting elements of the exhaust system are shown to a larger scale in the figure. Cars up to 4/87 of release 1.6 liter engine with catalytic converter Vehicles since 5/87 (front wheel drive) Petrol engines...
Removal and installation of system of release of the fulfilled gases Attention: The complete removal of the exhaust system is described below. However, the system can be dismantled in parts. In this case, it is necessary to change the rubber pads, gaskets and fixing nuts. Removing Place...
Removal and installation of the oxygen sensor (lambda probe) The oxygen sensor is used to adjust the composition of the exhaust gases of gasoline engines with a variable catalyst, depending on the version, the sensor is installed either in the exhaust pipe with the catalyst or in...