Steering device and description Steering consists of a steering wheel, a steering mechanism, a steering wheel shaft and tie rods. The steering wheel is fixed to the shaft with a nut and drives the drive racks through the steering mechanism. The rails...
Removal and installation of a steering wheel Removing Set the front wheels straight. Disconnect ground cable (-) from the battery. Attention: This erases the entries in the fault memory and the radio code. Before disconnecting the battery, read the contents of the...
Removal and installation of the hinge of steering draft Removing Loosen the wheel nuts while the vehicle is on the ground. Fix the position of the wheel disc in relation to the hub. Thanks to this, the balanced wheel will return to its original position. Raise the front of...
Removal and installation of protective covers of drafts of a steering Removing Remove the tie rod end. Unclip the clamps at both ends of the protective cover. Remove protective covers. Attention: If the protective cover has been damaged for a long time, then it should be borne in mind...
Adjusting the geometric parameters of the chassis of the car Optimum driving performance and smallest and «The nose of a car's tires is achieved with proper wheel alignment. In the event of incorrect and worn tires, vehicle instability during straight-line driving and poor...